In this system minimum quantity of oil is pushed by air in a narrow spiral tube and the tube is connected to the part of machine to be lubricated. The component of the machine / bearing is continuously supplied with droplet of oil. The air caries the oil droplet to the bearings & very small quantity of oil is supplied to bearings by using Lubomatic air-oil lubrication system the quantity of oil is precisely controlled. By using Lubomatic Air-Oil Lubrication system the machine can be operated at higher speed and productivity can be increased. The dust & dirt near by the bearings is forced away from the bearings and the bearing is kept clean & cool and lubricated.
The air oil Lubrication is used in
- Grinding Machine Spindle Bearings Lubrication.
- Gear box lubrication of any machine.
- Rolling Mill bearing lubrication.
- Internal Grinding machine Bearing.
- Machine Slides
- Gear Train
- Conveyor chains
ADVANTAGES
- The oil consumption is reduced considerably, compared to Oil-Mist lubrication.
- Reduced temperature of the bearings and the machine can be run at higher speed& in turn increase in the production.
- Due to continuous supply of fresh oil & air in right quantity. The bearings are protected from outside contamination & only minimum quantity of oil consumed.
- No mist in shop floor to breathe but only clean air.
Skey Products also manufactures Motorised lubrication unit, Multipoint Oil/Grease lubrication system, Dual line Oil/Grease lubrication system, Progressive Blocks, Orifice Control Metering Valve, Metering Cartridge, Mist Lubrication System, Air-Oil Lubrication System, Oil Circulatory System ( O.C.S. ), Electronic Controllers, Conveyor Lubrication System and all in lubrication.